Solenoid Plunger Assembly | 12V/24V DC | Custom Stroke & Force | For Solenoid Valve & Actuator

Qimao Metal Manufacturer Solenoid Plunger Assembly | 12V/24V DC | Custom Stroke & Force | For Solenoid Valve & Actuator is a serviceable replacement or OEM component for solenoid valves and actuators. We machine the plunger and guide tube as a matched set, so the clearance that governs force output and response time is controlled at the source. Available in 12V or 24V DC, with stroke and spring rate tuned to your valve body.

                      

Product infor:

Solenoid Plunger Assembly | 12V/24V DC | Custom Stroke & Force | For Solenoid Valve & Actuator  from Qimao Metal Manufacturer is customized part—it is the moving element inside the magnetic circuit. When the coil energizes, the plunger travels through the guide tube and shifts the seal or spool that controls flow. What matters is not the plunger alone, but the fit between plunger, tube, and return spring.

We produce the magnetic plunger from 430FR stainless and the guide tube from seamless 304. Both are machined in-house, which means we hold the clearance directly rather than assembling from purchased components with unknown tolerances. Each lot is cycled and pressure-tested before packing.

Product Specification:

Product Name: Item No.: Material:               Measurement(mm): Surface Finish: Weight(g):
L: W: Dia:
Solenoid Plunger Assembly | 12V/24V DC | Custom Stroke & Force | For Solenoid Valve & Actuator QM2006 Stainless steel 82.68 / 23.9/25/17/10 Polish 106.5

Product Details:

Item:

Solenoid Plunger Assembly | 12V/24V DC | Custom Stroke & Force | For Solenoid Valve & Actuator

Specification
Voltage 12V DC / 24V DC (specify at order)
Plunger Material 430FR stainless steel, magnetic grade
Guide Tube Seamless 304 stainless steel
Seal NBR standard, FKM available
Stroke Customized to valve requirement
Force Tuned to coil and stroke combination
Connection Threaded or flanged, depending on model
Testing 100% pressure-tested
Operating Temp -40°C to 100°C (NBR standard)

Core Feature:

  • Stroke and force matched to your valve — Provide valve interface, travel, and coil envelope; we calculate plunger length, spring rate, and pole gap so the pull-in curve fits your valve. If the coil is fixed, we work backward from its amp-turns.

  • Solenoid Plunger Assembly | 12V/24V DC | Custom Stroke & Force | For Solenoid Valve & Actuator-to-tube clearance held as a controlled dimension — Radial clearance between 430FR plunger and seamless 304 tube drives response consistency, side load, and noise. Both parts run on the same process chain; actual clearance is recorded per batch, and out-of-band parts do not ship.

  • 430FR stainless for lower hysteresis and wear — Less heat per cycle and more stable force after long continuous operation than standard 430. Resists galling against the 304 tube. For high-cycle valves—sorting, dispensing, packaging—this extends service life.

  • Seamless guide tube, leak-checked weld — Tube drawn seamless, welded to end seat as one piece, helium leak-checked. No weld-then-bore route, so no slag risk or distortion at the sealing end.

  • 100% pressure test with records — Every assembly leak-checked under pressure, not sampled. Test record filed against batch and heat number for traceability.

  • Drop-in fit to common footprints — Threaded and flanged options dimensioned to common solenoid valve interfaces; no valve body re-machining for replacement.

  • Seal options matched to media — NBR standard for water, air, light hydraulic up to 100°C; FKM available for aggressive media or higher temperature. Selected at order, not afterthought.

Wide Usage:

  • Pneumatic directional valves — Moving armature in 2/3/5-way solenoid valves on automation lines. Solenoid Plunger Assembly | 12V/24V DC | Custom Stroke & Force | For Solenoid Valve & Actuator high-cycle duty is where lower hysteresis and controlled clearance show: consistent shift timing, less heat, quieter operation.

  • Water treatment and fluid handling — RO inlet and flush valves, irrigation controllers, metering pump heads. 304 tube and 430FR plunger resist corrosion; custom stroke opens fully at low differential pressure.

  • Industrial actuators — Sorting gates, locking pins, damper louvers. Custom force matching avoids oversizing the coil where power budget or heat is tight.

  • Automotive and off-highway — Cooling bypass valves, fuel shut-off, auxiliary hydraulic control. Corrosion-resistant wetted end suits engine-bay conditions; drop-in footprint cuts service time.

  • OEM equipment — Packaging, vending, lab instruments. Value is drawing-level customization: stroke, spring rate, and connection defined once, then repeated with same process parameters and heat numbers.

  • Replacement and MRO — Restores function where valve body is sound but plunger or tube is worn or sticking. Matched-set fit means replacement behaves like the original, without new noise or response issues.

Customization Service

IATF 16949 and ISO 9001 here are process documents, we offer professional service and technology to our customer. For example as the Solenoid Plunger Assembly | 12V/24V DC | Custom Stroke & Force | For Solenoid Valve & Actuator ,the customer high quality requirements define how we control special characteristics, handle nonconforming parts, and keep traceability from material heat number to finished assembly. Our engineering group does precision machining for robotics components and liquid-cooling parts—we take your drawing, flag the tolerances that actually drive function, and build the process around them. Inspection stays in-house: our own metrology equipment and QC staff, and for high-precision parts every piece is checked against critical dimensions before it ships. Since the plunger and guide tube are machined here, the clearance that sets force and response is held at the source, batch to batch, with records kept.

Reviews

There are no reviews yet.

Be the first to review “Solenoid Plunger Assembly | 12V/24V DC | Custom Stroke & Force | For Solenoid Valve & Actuator”

Your email address will not be published. Required fields are marked *